Reference Guide

Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0032
Message Unable to initialize the TPM chip because the TPM chip is not functioning.
Detailed
Description
The TPM chip cannot be initialized because the TPM chip is not functioning.
Recommended
Response
Action
Remove input power from the system, wait for 30 seconds, and re-apply input
power. Turn on the system.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0033
Message Default system BIOS settings are in use because NVRAM_CLR jumper is installed on
the system board.
Detailed
Description
The NVRAM_CLR jumper is installed to clear the BIOS configuration. After clearing
the BIOS configuration, remove the NVRAM_CLR jumper so that the system can
function normally and any non-default BIOS system setting changes can be
persistently saved.
2031