Reference Guide

UEFI0028
Message iDRAC is not responding after a recovery system reset was performed.
Detailed
Description
The iDRAC is not responding after a recovery system reset was performed. BIOS
will continue POST startup with iDRAC in a non functional state.
Recommended
Response
Action
Remove input power from the system, wait for 30 seconds, and re-apply input
power. Turn on the system.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0029
Message Unable to initialize iDRAC because of some critical issues.
Detailed
Description
iDRAC could not be initialized because of some critical issues. Continuing to boot
may result in unexpected power loss because of unknown power inventory and
unavailability of features such as remote out of band access, active power
management, thermal management, inventory collection, LCD, or system error
reporting.
Recommended
Response
Action
Do one of the following: 1) Remove input power from the system, wait for 30
seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC
firmware. 3) Continue to boot. Note: This may result in unexpected power loss
because of unknown power inventory and unavailability of features such as remote
out of band access, active power management, thermal management, inventory
collection, LCD, or system error reporting.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
2029