Reference Guide

Detailed
Description
iDrac is not responding to BIOS commands. The BIOS will reset the system to retry
the initialization process.
Recommended
Response
Action
Wait for the BIOS to reset the system and reinitialize the iDRAC. If the issue persists,
remove input power from the system, wait for 30 seconds, and re-apply input
power. Turn on the system.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0027
Message The system must be restarted for the new license to become effective.
Detailed
Description
A license change for the system or a component in the system requires a system
reset in order for the new license to take effect.
Recommended
Response
Action
Wait for the BIOS to reset the system.
Category Configuration
Subcategory UEFI = UEFI Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
2028