Reference Guide

Recommended
Response
Action
Remove input power from the system, wait for 30 seconds, and re-apply input
power. Turn on the system.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0025
Message Unable to initialize Management Engine firmware.
Detailed
Description
The Management Engine firmware cannot be initialized. The BIOS will reset the
system to retry the initialization process.
Recommended
Response
Action
Wait for the BIOS to reset the system and reinitialize the Management Engine. If the
issue persists, turn off the input power to the system and turn on again.
Category System Health
Subcategory UEFI = UEFI Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
UEFI0026
Message iDRAC is not responding.
2027