Reference Guide

Detailed
Description
System was unable to read planar board or control panel temperature sensors. The
fan speed was increased to protect system hardware.
Recommended
Response
Action
Remove AC power from the system and reapply AC power. Check to see if the
issue is resolved. If the issue persists, contact your service provider.
Category Audit
Subcategory TMP = Temperature
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
TMP8502
Message Able to read planar board temperature sensors. Cooling set for normal chassis
operation.
Detailed
Description
The system has recovered from being unable to read planar board or control panel
temperature sensors.
Recommended
Response
Action
No response action required.
Category Audit
Subcategory TMP = Temperature
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
2007