Reference Guide

Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
TMP8500
Message I/O Module arg1 temperature exceeded operating range.
Arguments
• arg1 = iom slot name
Detailed
Description
The temperature of the I/O Module identified in the message has increased beyond
the operational range. Thermal protection shut down the I/O Module. Factors
external to the I/O Module may have caused this situation.
Recommended
Response
Action
Check the chassis event log for fan issues and fix any issues present. If no fan issues
are detected, check chassis ambient temperature and make sure the temperature is
within operating range. Utilize the RACADM command "racadm getsensorinfo" to
check the chassis ambient temperature.
Category Audit
Subcategory TMP = Temperature
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
TMP8501
Message Unable to read planar board temperature sensors. The cooling has been increased
to safeguard the system.
2006