Reference Guide

TMP501
Message Unable to read the arg1 sensor value.
Arguments
• arg1 = sensor name
Detailed
Description
A temperature sensor identified in the message has failed. This condition can cause
system performance issues and degradation in the moitoring capability of the
system.
Recommended
Response
Action
Verify the Embedded System Management (ESM) Log for any sensor related faults.
If there is a failed sensor, replace the system board. For more information, contact
your service provider.
Category System Health
Subcategory TMP = Temperature
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5051
Server
Administrator
Trap ID
Not Applicable
TMP502
Message The arg1 sensor has returned to a normal state with a value of arg2 degrees
Celsius.
Arguments
• arg1 = sensor name
• arg2 = temperature
Detailed
Description
The sensor identified in the message has returned to a normal state.
Recommended
Response
Action
No response action is required.
Category System Health
Subcategory TMP = Temperature
Severity Severity 3 (Informational)
2002