Reference Guide

Arguments
• arg1 = tempsensor name
Detailed
Description
The enclosure is too hot. A variety of factors can cause the excessive temperature.
For example, a fan may have failed, the thermostat may be set too high, or the
room temperature may be too hot.
Recommended
Response
Action
Check for factors that may cause overheating. For example, verify that the
enclosure fan is working. You should also check the thermostat settings and
examine whether the enclosure is located near a heat source. Make sure the
enclosure has enough ventilation and that the room temperature is not too hot.
Refer to the enclosure documentation for more diagnostic information.
Category Storage
Subcategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2102
Server
Administrator
Trap ID
105400
TMP1003
Message arg1 has crossed the minimum failure threshold.
Arguments
• arg1 = tempsensor name
Detailed
Description
The enclosure is too cold.
Recommended
Response
Action
Check whether the thermostat setting is too low and whether the room
temperature is too cool.
Category Storage
Subcategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default LC Log
1999