Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS151
Message Completed System Erase Job ID: arg1
Arguments
• arg1 = job ID
Detailed
Description
A System Erase job with the job ID identified in the message is completed.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS152
Message Erase operations for some System Erase tasks did not complete successfully.
Detailed
Description
Some of the requested storage component erase tasks were not successful.
Retrying the System Erase operation may be required. The vFlash SD Card must be
initialized and licensed to be erased successfully.
Recommended
Response
Action
Retry the System Erase operation. To retry the System Erase operation using the
Lifecycle Controller utility, restart the server and when the company logo is
displayed, press <F10>. Select Hardware Configuration > Retire or Repurpose
System, check appropriate storage options, and then retry the operation.
Category Configuration
1949