Reference Guide

Server
Administrator
Trap ID
Not Applicable
SYS149
Message The process of resetting iDRAC to default settings is initiated.
Detailed
Description
Initiating iDRAC reset to defaults operation because of a System Erase operation.
The iDRAC will restart after firmware default values are restored.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS150
Message Starting System Erase operation. Job ID: arg1
Arguments
• arg1 = job ID
Detailed
Description
A System Erase job with the job ID identified in the message is initiated.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
1948