Reference Guide

Detailed
Description
The OS collector cannot be exposed to the host server because of communication
issues between the iDRAC and server OS.
Recommended
Response
Action
Do the following: 1) Retry the operation. 2) If the issue persists, restart the iDRAC
and server OS.
Category System Health
Subcategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS120
Message Unable to complete the operation because the OS Collector is taking too much
time. The operation is cancelled.
Detailed
Description
The OS Collector application did not complete its task within the maximum
allowed time and the operation is cancelled. This may be because the server OS is
not supported by the OS Collector application and the application is unable to
function correctly.
Recommended
Response
Action
Do the following: 1) Make sure that the OS Collector application supports the OS
installed on the server. If the OS is not supported, the OS Collector may not
function correctly. 2) Reinstall the latest OS Collector on the iDRAC, and then retry
the operation. To install the OS Collector using the iDRAC Web UI, get the latest
OC Collector update package and then select the Update and Rollback link from
the iDRAC Web UI home page and upload the install package. If the issue persists,
contact your service provider.
Category System Health
Subcategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
1932