Reference Guide

Recommended
Response
Action
If further configuration changes are required for the system, the Lifecycle
Controller State must be enabled prior to attempting the configuration change. To
enable the Lifecycle Controller State, run the racadm command "racadm set
LifecycleController.LCAttributes.LifecycleControllerState Enabled".
Category Configuration
Subcategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS098
Message A Remote Diagnostic (ePSA) job already exists.
Detailed
Description
A Remote Diagnostic (ePSA) job already exists and only one job of this type can
exist at a time.
Recommended
Response
Action
A response action is not required if the scheduled start time of the existing Remote
Diagnostic (ePSA) job is ok. Else, delete the existing Diagnostics (ePSA) job and
recreate another with an appropriate start time.
Category System Health
Subcategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SYS099
Message Unable to export the diagnostics results because the results do not exist.
1918