Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 8.0.1
1851185218531854185518561857185818591860
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC1927
Message The iDRAC Quick Sync access feature is set to the read-only mode.
Detailed
Description
The iDRAC Quick Sync access feature is set to the read-only mode.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC1928
Message The iDRAC Quick Sync access feature is set to the read-write mode.
Detailed
Description
The iDRAC Quick Sync access feature is set to the read-write mode.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
1853