Reference Guide

Server
Administrator
Trap ID
Not Applicable
SWC0262
Message Unable to perform operation. Please make sure RAC controller and \nappropriate
IPMI drivers are installed.
Detailed
Description
The IPMI drivers or the RAC contorller may not be installed.
Recommended
Response
Action
Check if the required modules are installed.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0263
Message Specified path is too long.
Detailed
Description
The length of path to the firmware image is longer than the specified value.
Recommended
Response
Action
Enter a shorter path to the firmware image file.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
1805