Reference Guide

Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0253
Message Unable to allocate memory needed to perform operation.
Detailed
Description
Unable to allocate memory to perform the operation, see the inserted comment.
Recommended
Response
Action
Power Cycle the system and re-enter the command.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0254
Message Unable to perform requested operation. \nIf the operation attempted was to
configure DRAC, possible reason may be that \nLocal Configuration using
RACADM is disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response
Action
Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
1800