Reference Guide

Recommended
Response
Action
Set cfgIpmiPetAlertEnable in cfgIpmiPet group using config subcommand for the
corresponding index.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0131
Message Trap destination address must be configured.
Detailed
Description
The destination Ip address must be configured for the Trap.
Recommended
Response
Action
Set cfgIpmiPetAlertDestIpAddr in cfgIpmiPet group using config subcommand for
the corresponding index.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0132
Message Unable to send test trap. Please make sure that your trap\nhas been configured
correctly and connectivity to \nthe destination endpoint exists.
1756