Reference Guide

Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0049
Message Unable to continue the Import operation.
Detailed
Description
The Import operation cannot continue because backup image file is not present on
the vFlash SD card, the image is invalid, or the entered passphrase is incorrect.
Recommended
Response
Action
Make sure that the backup image file is present on the vFlash SD card, the image is
valid, and the entered passphrase is correct.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0050
Message Unable to initiate Import operation.
Detailed
Description
Unable to initiate Import operation since iDRAC is not responding.
Recommended
Response
Action
Retry the Import operation using a valid backup image file and the correct
passphrase. If the problem persists, do the following: 1) Turn off the system and
disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord,
turn on the system, and retry the operation.
1725