Reference Guide

Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0045
Message Unable to complete the Import operation.
Detailed
Description
The Import operation did not successfully complete. For more information, see the
Lifecycle Log.
Recommended
Response
Action
Exit the Import Server Profile wizard and retry the operation. If the problem persists,
do the following: 1) Turn off the system and disconnect the power cord. 2) Wait for
five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0046
Message Unable to initiate Import operation.
Detailed
Description
Unable to initiate Import operation since another Import operation is already in
progress.
Recommended
Response
Action
Wait until current Import operation is complete before initiating a new Import
operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
1723