Reference Guide

Detailed
Description
Lifecycle Controller is unable to export the file to the network share because the
destination folder is not present or inaccessible.
Recommended
Response
Action
Make sure that the destination folder is present and accessible, then retry the
operation. If the problem persists, check network settings and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0038
Message Unable to export the file to the network share.
Detailed
Description
Lifecycle Controller is unable to export the file to the network share because the
destination folder is read-only or inaccessible.
Recommended
Response
Action
Remove the write protection on the destination folder and verify the folder is
accessible, then rety the operation. If the problem persists, check network settings
and retry.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1719