Reference Guide

Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0014
Message Unable to set new date and time.
Detailed
Description
Unable to apply the changes to the date and time settings because an internal error
occurred.
Recommended
Response
Action
Exit the Date and Time wizard and retry the operation. If the problem persists, exit
Lifecycle Controller and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0015
Message Unable to retrieve the list of supported operating systems.
1708