Reference Guide

LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0004
Message Unable to add a work note to the Lifecycle Log.
Detailed
Description
The operation to add a work note to the Lifecycle Log encountered an unexpected
error while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0005
Message Unable to display the current hardware inventory.
Detailed
Description
The view current hardware inventory operation encountered an unexpected error
while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory SWC = Software Config
1704