Reference Guide

Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0002
Message Unable to set Part Replacement policies.
Detailed
Description
The Part Replacement policy configuration operation encountered an unexpected
error while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
SWC0003
Message Unable to display the Lifecycle log.
Detailed
Description
An unrecoverable error occurred while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
Subcategory SWC = Software Config
Severity Severity 1 (Critical)
1703