Reference Guide

Recommended
Response
Action
Identify and replace the failed components. To identify the failed component,
select the Storage object and click the Health subtab. The controller status
displayed on the Health subtab indicates whether a controller has a failed or
degraded component. Click the controller that displays a Warning or Failed status.
This action displays the controller Health subtab which displays the status of the
individual controller components. Continue clicking the components with a
Warning or Failed status until you identify the failed component. See Storage
Health for more information. See the enclosure documentation for information on
replacing enclosure components and for other diagnostic information.
Category Storage
Subcategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID 4178
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
2123
Server
Administrator
Trap ID
130600
STOR6
Message CEM Storage Management detected inventory change(s) after host re-boot.
Detailed
Description
A comparison of storage inventory collected before and after the host re-boot/re-
set. reports differences. There could have been some storage components added
or removed when the host was powered down.
Recommended
Response
Action
No response action is required.
Category Storage
Subcategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID 4179
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
1645