Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RED093
Message The requested job cannot be scheduled because Lifecycle Controller is not
enabled.
Detailed
Description
Lifecycle Controller is not enabled and must be enabled in order for scheduled jobs
to be created.
Recommended
Response
Action
Enable Lifecycle Controller and retry the operation. Lifecycle Controller can be
enabled by using the F2 System Setup by pressing F2 during server startup, then
select iDRAC Settings > Lifecycle Controlller and enable the Lifecycle Controller
feature. Retry the operation after the server restarts.
Category Updates
Subcategory RED = FW Download
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RED094
Message Updating firmware for arg1 from version arg2 to version arg3 .
Arguments
• arg1 = component name
• arg2 = available firmware version
• arg3 = installed firmware version
Detailed
Description
The firmware for the component identified in the message is being updated to the
firmware version identified in the message.
Recommended
Response
Action
No response action is required.
1492