Reference Guide

LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC961
Message A pending or committed system configuration change exists.
Detailed
Description
Another import operation cannot be started if an import operation that was
performed earlier has some pending or commited configuration changes.
Recommended
Response
Action
Wait until the configuration changes are applied before starting another import
operation. Use the racadm jobqueue view command to check the status of the
current import operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC962
Message Unable to continue with the operation because Lifecycle Controller is in recovery
state,
Detailed
Description
Lifecycle Controller must be enabled to run the operation.
Recommended
Response
Action
Enable the Lifecycle controller using the racadm set
LifeCycleController.LCAttributes.LifecycleControllerState 1 command, and retry the
operation.
Category Configuration
Subcategory RAC = RAC Event
1411