Reference Guide

RAC1178
Message A USB device is attached to the iDRAC and a configuration XML import operation is
in progress.
Detailed
Description
A USB device is attached to the iDRAC and a configuration XML import operation is
in progress.
Recommended
Response
Action
Wait until the configuration XML import operation has completed before
attempting another operation. Verify the status of the configuration XML import
operation by running the RACADM command "racadm jobqueue view".
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1179
Message Unable to complete requested operation because an Type A/A USB cable is
connected to the front panel USB port and the iDRAC is emulating a NIC device.
Detailed
Description
Unable to complete requested operation because a Type A/A USB cable is
connected to the front panel USB port and the iDRAC is emulating a NIC device.
Recommended
Response
Action
To change the USB Management Port mode setting, remove the Type A/A USB
cable from the front panel USB port and change the port mode settings.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
1383