Reference Guide

Detailed
Description
The Certificate Signing Request (CSR) message cannot be generated because all
the attributes in the iDRAC.Security group are not configured.
Recommended
Response
Action
Make sure that all the attributes in the iDRAC.Security group are configured. To get
the list of attributes, run the following command "racadm get iDRAC.Security".
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1177
Message A USB device is attached to the iDRAC.
Detailed
Description
A USB device is attached to the iDRAC and accessible from the iDRAC.
Recommended
Response
Action
No response action is required. To attach the USB device to the server instead of
the iDRAC, remove the USB device from the front panel USB port, change the USB
Management Port mode settings and then reinsert the USB device.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1382