Reference Guide

Detailed
Description
The firmware could not be successfully updated, because one or all of the
following values are incorrect: a. logon ID b. IP address of TFTP or FTP server c. Full
path of the firmware file.
Recommended
Response
Action
Run the racadm command "racadm help <subcommand>" to get more details
about the various options applicable for this command and the values accepted by
the command.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1133
Message BIOSRTDRequested value is modified successfully.The BIOS reset to default values
operation is pending a server restart.
Detailed
Description
The BIOSRTDRequested attribute was modified successfully.The BIOS reset to
default values operation is pending a server restart.
Recommended
Response
Action
To apply the BIOS default values, restart the server. After the server has restarted,
the default BIOS values will be accessible from the iDRAC.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1362