Reference Guide

Recommended
Response
Action
Verify whether or not a correct version of BIOS, Lifecycle Controller, and/or iDRAC
firmware is installed. For more information on the appropriate firmware version
required, refer to the RACADM Command Line Reference Guide. Also check if
there is a limitation in terms of platforms such as monolithic or modular, and then
retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1131
Message iDRAC was successfully reset.
Detailed
Description
The iDRAC was reset and is successfully restarted.
Recommended
Response
Action
None.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1132
Message Unable to update the firmware. The value entered for an option is invalid.
1361