Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1123
Message Unable to perform the operation because Fibre Channel (FC) attributes are not
available in the current server configuration.
Detailed
Description
Fibre Channel (FC) objects are not available if Fibre Channel devices are not
installed in the server, or if some iDRAC services are busy.
Recommended
Response
Action
Do the following: 1) Power off and remove AC or DC power from the server. 2)
Make sure the Fibre Channel devices are correctly installed in the server. 3) Restart
the server to allow the Collect System Inventory On Restart (CSIOR) feature to
update the server inventory. 4) Retry the operation. If the issue persists, contact
your service provider.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1128
Message The -l option must be specified if -u and -p options are used.
Detailed
Description
Any operation involving remote share (CIFS) cannot continue if the location (-l
option) is not specified. The -u and -p options represent the user name and
password for the remote share, and -l represents the location of the remote share.
Recommended
Response
Action
Make sure to specify the location (-l option) of the remote share along with the
user name and password, and retry the operation. To view the list of options that
can used for the required subcommand, run the RACADM command "racadm help
<subcommand>".
Category Configuration
1359