Reference Guide

Server
Administrator
Trap ID
Not Applicable
RAC1073
Message Unable to reset the threshold value of sensor arg1 because the capability to reset
this sensor threshold value is not supported.
Arguments
• arg1 = sensor name
Detailed
Description
The threshold value of the sensor identified in the message cannot be successfully
set because the capability reset the sensor threshold value is not supported.
Recommended
Response
Action
No response action is required. For more information about resetting the threshold
level of a sensor, run the "racadm getsensorinfo" command at the command line
interface (CLI), and then retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1109
Message Unable to run the command, because an incorrect Share type is entered.
Detailed
Description
Unable to run the command, because an incorrect Share type was entered.
Recommended
Response
Action
Enter an appropriate Share location of the following types: FTP, NFS, or CIFS. For
more information, run the "racadm help update" command.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
1351