Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1057
Message Rollback operation did not complete successfully. The component identifier
specified is not valid or does not have a rollback firmware image available.
Detailed
Description
Rollback operation did not complete successfully. The component identifier
(FQDD) specified in the operation is not valid or does not have a Rollback firmware
image available.
Recommended
Response
Action
Run the RACADM command "racadm swinventory" to see the list of Rollback
firmware images available and the corresponding component identifier (FQDD).
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1058
Message Rollback operation did not complete successfully because Lifecycle Controller is
disabled.
Detailed
Description
The requested firmware Rollback operation did not complete successfully because
Lifecycle Controller is disabled.
Recommended
Response
Action
Run the RACADM command "racadm set
LifecycleController.LCAttributes.LifecycleControllerState 1" to enable Lifecycle
Controller, and retry the operation.
Category Configuration
Subcategory RAC = RAC Event
1342