Reference Guide

Detailed
Description
The operation did not complete successfully because of an invalid value for the
option identified in the message.
Recommended
Response
Action
Retry with a correct value for the option identified in the message. For more
information, view the help details by running the RACADM command "racadm help
systemconfig backup".
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1052
Message The Automatic Backup (autobackup) feature is not enabled.
Detailed
Description
The Automatic Backup (autobackup) feature is not enabled.
Recommended
Response
Action
To enable, run the RACADM command "racadm set
lifecyclecontroller.lcattributes.autobackup 1".
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1339