Reference Guide

Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1035
Message There are no pending values to be cleared.
Detailed
Description
The command is unable to clear the pending state for attributes of the specified
component because there are no pending values.
Recommended
Response
Action
Make sure that there is at least one attribute on the specified device has a pending
value, and retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1036
Message Successfully cleared pending attribute(s) for the group specified.
Detailed
Description
Successfully cleared pending values for attributes in the group specified.
Recommended
Response
Action
To verify, run the RACADM command "racadm get group".
1330