Reference Guide

Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1014
Message The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Detailed
Description
The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Recommended
Response
Action
To configure the SNMPv3 Privacy Protocol for a specified iDRAC user, change the
SNMPv3 Authentication Protocol to either MD5 or SHA state using "racadm set
idrac.users.<index>.SNMPv3AuthenticationType <value>".
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1016
Message The specified user already exists. Duplicate user names are not allowed.
Detailed
Description
iDRAC does not allow duplicate user names for each of the 16 users.
Recommended
Response
Action
Make sure that each of the 16 user names are unique.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
1320