Reference Guide

Server
Administrator
Trap ID
Not Applicable
RAC1010
Message Unable to set the power cap value.
Detailed
Description
The power cap cannot be set if the object Power.Cap is disabled.
Recommended
Response
Action
Enable Power Cap setting using "racadm set System.Power.Cap.Enable < 1 |
Enabled >", and retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1011
Message The OS to iDRAC pass-through cannot be enabled.
Detailed
Description
The OS to iDRAC pass-through cannot be enabled, because the NIC is in
Dedicated mode.
Recommended
Response
Action
Change the iDRAC NIC mode to shared mode using "racadm set idrac.nic.selection
<value>", and retry the opeation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
1318