Reference Guide

Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC0912
Message Unable to connect to RAC at specified IP address.
Detailed
Description
The management system could not connect to the iDRAC.
Recommended
Response
Action
Verfiy whether the IP address of the remote iDRAC is correct. Verify whether
connectivity exists between the management system and the iDRAC.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC1000
Message Unable to set the object value for iDRAC IPv6 address or gateway.
Detailed
Description
Unable to set the object value for iDRAC IPv6 Address1 and IPv6 Gateway, because
the object IPv6 Autoconfig is enabled.
Recommended
Response
Action
Disable the object IPv6 AutoConfig using "racadm set iDRAC.IPv6.AutoConfig <0 |
Disabled >", and retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
1312