Reference Guide

RAID mode, convert them to RAID mode by pressing Ctrl+R while restarting the
server, and then select the required controller. Press F2 and select the Convert to
RAID capable option, and then complete the operation. 5) If a job is currently
running or scheduled on the selected controller, the job must be completed or
deleted before attempting a new operation. Status of the scheduled job can be
viewed and managed on the Job Queue page on iDRAC. Click Job Queue link to
view the status of the scheduled jobs.
Category Storage
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC052
Message Unable to create a configuration job because an existing configuration job is
already in progress.
Detailed
Description
Unable to create a configuration job because an existing configuration job is
already in progress. Only one configuration job for a component can run or can be
processed at any time.
Recommended
Response
Action
Retry the operation after the existing configuration job is complete, or cancel the
existing configuration job and retry the operation.
Category Configuration
Subcategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1261