Reference Guide

Detailed
Description
The amount of time iDRAC waits before sending a partial Serial Over LAN (SOL)
data packet. This parameter is specified in milliseconds. It is recommended to use
10 milliseconds for optimal performance.
Recommended
Response
Action
Enter a valid Character Accumulate Interval value. Expected range: 1-255.
Category Audit
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC0295
Message The Character Send Threshold value is invalid. Expected range: 1-255.
Detailed
Description
This is the number of characters per Serial Over LAN (SOL) data packet. When the
number of characters accepted by iDRAC is equal to or greater than the Character
Send Threshold value, iDRAC starts transmitting SOL data packets that contain the
numbers of characters equal to or less than the Character Send Threshold value. If
a packet contains fewer characters than this value, it is defined to be a partial SOL
data packet. It is recommended to use 255 characters for optimal performance.
Recommended
Response
Action
Enter a valid Character Send Threshold value. Expected range: 1-255.
Category Audit
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
1242