Reference Guide

Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC0219
Message Power command failed.
Detailed
Description
Requested power state change has failed.
Recommended
Response
Action
Try the operation after a few minutes. If the problem persists, reset iDRAC and
repeat the operation.
Category Audit
Subcategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
RAC022
Message Unable to set values for User Password, IPMILan, IPMISerial or User Admin Privilege
because the User Name is not configured.
Detailed
Description
Unable to set values for User Password, IPMILan, IPMISerial or User Admin Privilege
because the User Name is not configured.
Recommended
Response
Action
Set User Name before attempting to set values of other identified attributes.
Category Configuration
1202