Reference Guide

Recommended
Response
Action
Review system power policy, check system logs for power related failures, and
review system configuration changes. For more information, contact your service
provider.
Category System Health
Subcategory AMP = Amperage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5204
Server
Administrator
Trap ID
5204
AMP405
Message The arg1 sensor state has changed to a failed state with a value of arg2 A.
Arguments
• arg1 = sensor name
• arg2 = current
Detailed
Description
The current sensor identified in the message may be faulty. This condition can
cause system performance issues and degradation in the moitoring capability of
the system.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If there is a faulty sensor, replace the system board. For more information, contact
your service provider.
Category System Health
Subcategory AMP = Amperage
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5205
Server
Administrator
Trap ID
5205
117