Reference Guide

Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8671
Message The Chassis Management Controller is unable to set the Enhanced Cooling Mode
because the requested power arg1 AC Watts exceeds the subsystem power limit
arg2 AC Watts for IO Modules, Blowers and Servers.
Arguments
• arg1 = requested power level
• arg2 = power limit
Detailed
Description
The Enhanced Cooling Mode feature cannot be enabled because the requested
power exceeds the Chassis subsystem power limit for IO Modules, Blowers and
Servers.
Recommended
Response
Action
Make sure the system operates within the subsystem Connector Limit for the
components specified. To review power budget information select Chassis
Overview -> Power -> Budget Status. Turn off unused components within the
subsystem to make power available to set Enhanced Cooling Mode.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID 8419
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1157