Reference Guide

Detailed
Description
CMC could not successfully turn on the component identified in the message,
because of insufficient power available.
Recommended
Response
Action
Make sure there is sufficient power available, and then retry the operation. To view
the available power, on the CMC Web interface, click Chassis Overview > Power >
Power Budget Status. The available power is displayed in the Total Input Power
Available For Allocation field. To increase available power, add more PSUs or
remove unused components from the Chassis.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID 8418
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8663
Message Unable to turn on the server arg1 because of an inconsistency between the I/O
module and mezzanine card.
Arguments
• arg1 = server number
Detailed
Description
The server identified in the message could not be successfully turned on because
of incompatibility between the I/O module and mezzanine card.
Recommended
Response
Action
Make sure that the I/O module and mezzanine card are compatible. For
information about compatibility of hardware components, see the Modular System
Chassis Hardware Manual.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 1 (Critical)
Trap/EventID 8417
LCD Message No LCD message display defined.
Initial Default None
1152