Reference Guide

Detailed
Description
The current sensor identified in the message has failed. This condition can cause
system performance issues and degradation in the moitoring capability of the
system.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If there is a failed sensor, replace the system board. For more information, contact
your service provider.
Category System Health
Subcategory AMP = Amperage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5201
Server
Administrator
Trap ID
Not Applicable
AMP402
Message The arg1 sensor returned to a normal state with a value of arg2 A.
Arguments
• arg1 = sensor name
• arg2 = current
Detailed
Description
The current sensor identified in the message has returned to a normal state.
Recommended
Response
Action
No response action is required.
Category System Health
Subcategory AMP = Amperage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5202
115