Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8593
Message Chassis Management Controller is unable to turn on or turn off the chassis because
the chassis infrastructure component firmware update is in progress.
Detailed
Description
The chassis power operation cannot be performed when a chassis infrastructure
firmware update is in progress.
Recommended
Response
Action
Retry the operation after the chassis infrastructure component firmware update is
complete.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8594
Message Chassis Management Controller is unable to set the Enhanced Cooling Mode
because the requested power arg1 AC Watt is more than available power arg2 AC
Watt.
Arguments
• arg1 = requested watts
• arg2 = available watts
Detailed
Description
The available power is not sufficient to enable the Enhanced Cooling Mode feature.
Recommended
Response
Action
Make sure there is enough power supply to enable the Enhanced Cooling Mode
feature. Go to, the Chassis Overview > Power > Power Budget Status. In the Total
Input Power Available For Allocation field view the available power. To add more
power, insert more PSUs or remove unused components from the chassis.
1146