Reference Guide

PWR8586
Message Chassis Management Controller is unable to turn on server- arg1 because it is not
supported in the VRTX chassis.
Arguments
• arg1 = slot number
Detailed
Description
The Chassis does not support the server identified in the message.
Recommended
Response
Action
The server inserted is not supported in the Chassis. Remove the server from the
Chassis.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8587
Message Chassis Management Controller is unable to turn on server- arg1 because the
chassis enclosure is open.
Arguments
• arg1 = slot number
Detailed
Description
The server cannot be turned on if the chassis enclosure is open.
Recommended
Response
Action
The chassis enclosure is open. Retry the operation after closing the enclosure.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
1142