Reference Guide

Detailed
Description
A request to reset the CMC identified in the message is initiated. If a second CMC is
present, a failover to the other CMC will occur as a result.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8580
Message Chassis Management Controller is unable to turn on server- arg1 because the
Chassis is not turned on.
Arguments
• arg1 = slot number
Detailed
Description
The power on request for the server identified in the message was not successful
because the Chassis is turned off.
Recommended
Response
Action
Turn on the Chassis, and then retry the operation. To turn on the Chassis using the
Chassis Management Controller Web UI, go to Chassis Overview > Power >
Control, select the Power On System option, and then click Apply.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1138