Reference Guide

LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8533
Message Power cap changed from arg1 W AC to arg2 W AC.
Arguments
• arg1 = power value
• arg2 = power value
Detailed
Description
Power cap setting was changed.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR8534
Message Unable to set Server Based Power Management Mode to enable.
Detailed
Description
Unable to set Server Based Power Management Mode to enable.
Recommended
Response
Action
Retry the operation. If the issue persists, contact your service provider.
1111