Reference Guide

Detailed
Description
The system has detected a new peak power value.
Recommended
Response
Action
Make sure that the power usage corresponds to the the current hardware
configuration and workload.
Category System Health
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default OS Log;None
Server
Administrator
Event ID
5013
Server
Administrator
Trap ID
Not Applicable
PWR8500
Message Chassis power state updated to arg1 from arg2 .
Arguments
• arg1 = new power state
• arg2 = old power state
Detailed
Description
The chassis power state from the configuration database and the current state are
different. The current chassis power state will be updated in the configuration
database. This is to insure the chassis power state will be the same if the CMC is
rebooted or a CMC failover occurs.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
1094