Reference Guide

• arg2 = sleep threshold
Detailed
Description
The Power Supply Unit (PSU) hotspare thresholds were modified to the Wake
Threshold and Sleep Threshold identified in the message.
Recommended
Response
Action
No response action required.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR2260
Message The Intel Management Engine is unresponsive and the server thermal failsafe state
is activated.
Detailed
Description
The iDRAC experienced an IPMB communication issue with the Intel Management
Engine and was not able to recover IPMB communications. The server thermal
failsafe state is activiated.
Recommended
Response
Action
Disconnect power from the server and reconnect power. Turn on the server. If the
issue persists, contact your service provider.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1088